Advertisement
Quick Links
Instructions
Fully charge this product before use - Charge time 30 hours
The ultimate automotive essential...
The ideal leisure accessory
Powering 7Ah PowerPack Instructions.indd 1
Compact
PowerPack
RPP70 - 12v, 7Ah Compact PowerPack
www.ringautomotive.co.uk
12v
only
30/04/2010 13:39
<40°c
Advertisement
Related Manuals for ring RPP70
Summary of Contents for ring RPP70
- Page 1 Compact PowerPack RPP70 - 12v, 7Ah Compact PowerPack www.ringautomotive.co.uk Instructions only Fully charge this product before use - Charge time 30 hours <40°c The ultimate automotive essential... The ideal leisure accessory Powering 7Ah PowerPack Instructions.indd 1 30/04/2010 13:39...
- Page 2 Contents AC Mains Charger Input: 220/240v Output: 13.5v 500mA RPP70 PowerPack Instructions Replacement part number: RPT50 Safety Reverse Polarity Protection Anti-Arc Protection Circuit Protection Ensure no power is transfered if the booster cables are connected The battery clips will not spark if Prevents too much power draw from incorrectly.
- Page 3 Features 12v DC socket On/Off switch Connection 12v DC Reverse polarity Battery status Charge status Selection LED work light Indicator socket protection indicators indicator switch applications 0% 25% 75% 100% Powering 7Ah PowerPack Instructions.indd 3 30/04/2010 13:39...
- Page 4 Recharging the PowerPack Disconnect any 12v DC appliances AC charging • Plug the 230v AC mains charger into the charging socket on the PowerPack • Plug the mains charger into 230v AC mains supply • Turn on mains supply 30 hours •...
- Page 5 Vehicle jumpstarting Ensure the ON/OFF switch is in the ‘OFF’ position Disconnect any 12v DC appliances Turn off the LED work light Turn off the vehicle ignition Position the PowerPack on a flat surface away from engine moving parts. Connect the booster cable Red (+) clip to the red positive (+) battery terminal Black (-) clip to the black (-) battery terminal Check Connection...
- Page 6 Turn over the engine in 3 second bursts until the engine starts. With the vehicle’s engine running, leave the PowerPack for 2-3mins to fast charge the PowerPacks batteries before disconnecting. Disconnect booster cables For optimum and long life performance ‘RECHARGE THE POWERPACK’.
-
Page 7: Specifications
Specifications Caution: Internal battery Sealed Lead Acid No serviceable parts. Do not use if leads are damaged - Internal battery capacity danger of shock DC socket maximum continuous load DC power socket circuit breaker (auto reset) Spare Parts Part No. AC mains charger RPT50 Integral work lamp... - Page 8 Distributed by: Ring Automotive Limited, Gelderd Road, Leeds, England LS12 6NA +44 (0)113 213 2000 +44 (0)113 231 0266 autosales@ringautomotive.co.uk www.ringautomotive.co.uk Powering 7Ah PowerPack Instructions.indd 8 30/04/2010 13:39...