Dcm MC-HD100 User Manual page 36

7. SETUP
Move the cursor to the Setup item in the main
menu and press [home] button, SETUP menu appears,
as shown in the following figure.
Language
ColorSys
HDMIMode
Protocol
Address
AddrFix
Net Mode
Baudrate
Select Item
Change Value
[Menu] Back
Language: menu language, Optional items: EN,
Chinese
ColorSys: Set the DVI system, color in the
analog signal, Optional items: YPbPr, RGB（Only
effective under 720 p60/1080 p60）
HDMIMode: Set the HDMI output signal mode,
Optional items: On, Off
Protocol: Control protocol type. Optional items:
SETUP
EN
YPbPr
Off
VISCA
1
Off
Serial
9600
VISCA,P-D,P-P
Address: protocol address, To be decided
according to the agreement, can be set up under the
VISCA items: 1 ~ 7, P - P and P- D can be set up: 0 ~
254
AddrFix: If I can change through the serial port
of infrared switch, Optional items: On, Off （ When set
to On, cannot address via a serial port to modify the
camera）
Net Mode: The net mode of camera, Optional
items: Serial, Paral
Baudrate: Serial port baud rate. Optional items:
2400, 4800, 9600
8. RESTORE DEFAULT
Move the cursor to the Restore Default item in
the main menu and press [home] button, RESTORE
DEFAULT menu appears, as shown in the following
figure.
35