Wireless/Remote Flash - Konica Minolta Dynax 60 Instruction Manual

WIRELESS / REMOTE FLASH
Wireless/Remote flash allows the camera to control an off-camera
5600HS (D), 3600HS (D), 5400HS, 5400xi, or 3500xi flash unit
without the need of a cable. Single or multiple flash units can be
placed around the subject to create special lighting effects.
3
60 A
DVANCED OPERATION
On-camera
flash
The camera's built-in flash fires to control the
off-camera flash units rather than to
illuminate the subject. See your local camera
dealer about Minolta lighting accessories.
1
Slide the Minolta 5600HS(D) or 3600HS(D)
flash on the accessory shoe until the safety
lock engages (1).
Turn on the camera and flash unit.
Turn the function dial to the wireless / remote
2
position (2).
While pressing the function button (3),
4
turn the control dial (4) until "On" is
displayed on the data panel. Release
the
simultaneously sets the camera and
flash to the wireless mode.
Remove the flash from the camera.
Wireless/
Remote
flash
function button. This