Trademarks; Quick Reference; Attaching The Stand - Sharp Aquos LC-60LE660X Operation Manual

Trademarks

• The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
• SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with
rich bass, high frequency detail and clear dialog.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• DivX ® , DivX Certifi ed ® and associated logos are trademarks of DivX, LLC and are used under license.
®
• This DivX Certifi ed device has passed rigorous testing to ensure it plays DivX
• To play purchased DivX movies, fi rst register your device at vod.divx.com. Find your registration code in the DivX VOD
section of your device setup menu.
• MHL, the MHL Logo, and Mobile High-Defi nition Link are trademarks or registered trademarks of MHL, LLC in the United
States and other countries.
• The Wi-Fi CERTIFIED™ Logo is a certifi cation mark of Wi-Fi Alliance
• YouTube and the YouTube logo are trademarks of Google Inc.
• LC_ LCFONT+ and LC logo mark are registered trademarks of SHARP Corporation. This product
is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read
characters on an LCD screen. However, other non-LCD fonts are used for displaying some screen pages.

Quick Reference

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1
Confi rm the screws supplied with the TV.
(Six long screws and four short screws)
2
Insert the support angle into the stand base slot holes. (1)
• Please make sure left support angle into the left stand base and right support angle into the right stand base
(left side part engraved "L", right side part engraved "R").
- 2
®
video.
®
.
Quick Reference
3
Push the support angle follow the direction of the arrow mark on the stand base.
Push
Push the support angle follow
the direction of the arrow mark
4
For easily, user can use polystyrene foam as a jig to hold the stand base when fi xing by using the long
screws. (2)
2 Example for left side
Polystyrene foam
5
Insert the stand into the openings on the bottom of the TV. (3)
6
Insert and tighten four short screws into the holes on the rear of the TV. (4)
Soft cushion
4
3
NOTE
• To detach the stand, perform the steps in reverse order.
• Refer "Building the Work Table" in carton box to assemble the TV.
CAUTION
• Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious personal injuries as well as damage to the stand.
• The illustrations used throughout this manual are based on LC-60LE660X.
2