RedPlate ShredPlate Operation Manual page 2

RedPlate ShredPlate Operations Guide
The Clean Preamp is designed to provide a basic full range clean tone with plenty of clear
overtones.
Volume – Typical setting is between 10 and 1 o'clock but experimentation is encouraged.
Headroom is adjustable via an internal trim pot. (The trim pot location is covered in the Other
Features Section of this manual).
Tone Control - Adjusts the balance between highs and lows, engages a Bright function
when pulled.
The LO GAIN Preamp Section is a slightly hot-rodded version of the popular European Style
amplifier preamp with two important differences:
1. The combination of Volume and Gain lets you adjust the character of the channel at various
volume levels for consistency of tone and character in both small and large venue sizes.
2. The BYPASS feature of the Bass control bypasses the tone controls for even more "Girth".
Volume – Pulls for channel selection and sets the overall volume of the LO GAIN channel.
Gain –This control sets the amount of break up character you desire in your tone. Typical
setting is between 2 and 4 o'clock but experimentation is encouraged.
Treble Control – Adjusts the balance of high and low frequencies.
Middle Control – Controls the amount of Midrange frequencies, somewhat interactive with
the Bass Control.
Bass Control – Sets the amount of low end. Can be rotated to zero where it clicks off for a full
tone stack lift (Tone Controls are Bypassed).
LO GAIN PREAMP SECTION
2