Playing Ipod/Iphone/Ipad - Pioneer X-HM21BTD-K Operation Instructions Manual

iPod/iPhone/iPad playback

Playing iPod/iPhone/iPad

1 Connect your iPod/iPhone/iPad.
• If an iPod/iPhone/iPad is connected while the unit is
turned on, playback of the iPod/iPhone/iPad will not
begin.
2 Press USB as the input source.
"USB/iPod" is shown on the main display.
3 When the recognition is completed, will
begin playing automatically.
Note
• For detailed instructions on using the iPod/iPhone/iPad,
please refer to the manual supplied with the iPod/
iPhone/iPad.
• iPod/iPhone/iPad recharging occurs whenever an iPod/
iPhone/iPad is connected to this unit. (This function is
supported in standby mode as well.)
• When input is switched from USB/iPod to another
function, iPod/iPhone/iPad playback is temporarily
stopped.
• When iPod/iPhone/iPad is not playing and no operations
have been performed for more than 30 minutes, the unit
will automatically power off.
Important
If this unit cannot play your iPod/iPhone/iPad, perform the
following troubleshooting checks:
• Check whether the iPod/iPhone/iPad is supported by
this unit.
• Reconnect the iPod/iPhone/iPad to the unit. If this
doesn't seem to work, try resetting your iPod/iPhone/
iPad.
• Check that iPod/iPhone/iPad software is supported by
the unit.
If the iPod/iPhone/iPad cannot be operated, check the
following items:
• Is the iPod/iPhone/iPad connected correctly? Reconnect
the iPod/iPhone/iPad to the unit.
• Is the iPod/iPhone/iPad experiencing a hangup? Try
resetting the iPod/iPhone/iPad, and reconnect it to the
unit.
05
17
En