Enabling Analog Cameras - WavestoreUSA Video Recording System Installer Quick Start Manual

for any other capture cards fitted to the server.
3.6

Enabling Analog Cameras

To configure an analog camera, first click on the camera name in the Device Tree, the camera name will be
highlighted dark grey.
In the General submenu, click the 'Enabled' radio button to enable the camera ('x' will appear).
The 'Stretch Stream Options' submenu configures the two Video Streams (Stream 1 and Stream 2) for the camera
channel; each stream can be configured independently as follows:

Selection of which stream to be used for the live view display (if Stream 2 is active)

Compression Format

Frame Capture Rate

GOP Size

Resolution

Image Quality Settings

Bitrate
WSUSA-MAN-008-001
Figure 3.11 Devices Menu, Device Tree
18