MTD compact log splitter Operator's Manual
  1. Manuals
  2. Brands
  3. MTD Manuals
  4. Log Splitter
  5. compact log splitter
  6. Operator's manual

MTD compact log splitter Operator's Manual

Compact log splitter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty
O
'
M
peratOr
s
anual
Compact Log Splitter
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
MTD MACHINERY (SUZHOU) CO., LTD. SUZHOU, CHINA 215121
Printed In China
Form No. 769-09769
(March 6, 2014)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the compact log splitter and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MTD compact log splitter

Summary of Contents for MTD compact log splitter

  • Page 1 READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. MTD MACHINERY (SUZHOU) CO., LTD. SUZHOU, CHINA 215121 Printed In China Form No. 769-09769...

  • Page 2: Table Of Contents

    To The Owner Thank You Thank you for purchasing an MTD Log Splitter. It was carefully If applicable, the power testing information used to establish engineered to provide excellent performance when properly the power rating of the engine equipped on this machine can be operated and maintained.

  • Page 3: Safe Operation Practices

    Important Safe Operation Practices WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.

  • Page 4: Maintenance And Storage

    Operation This machine should be used for splitting wood only, do not use it for any other purpose. Before starting this machine, review the “Safety Follow the instructions in the manual(s) provided with any Instructions”. Failure to follow these rules may result in attachment(s) for this machine.

  • Page 5: Spark Arrestor

    A spark arrestor for the muffler is available through your terrain without adequate help. nearest engine authorized service dealer or contact the service For your safety, replace all damaged or worn parts MTD Machinery (Suzhou) Co., Ltd. Suzhou, department, immediately with original equipment manufacturer’s China 215121 (O.E.M.) parts only.

  • Page 6: Safety Symbols

    Safety Symbols This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR’S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING—...

  • Page 7: Assembly & Set-Up

    Assembly & Set-Up Contents of Carton • One Log Splitter • One Operator’s Manual • One 20 oz. Bottle SAE 10W30 Oil • One Engine Operator’s Manual NOTE: This Operator’s Manual covers several models. Log splitter Lower the machine to level ground. features may vary by model.
  • Page 8 Engine Remove the clevis pin and hairpin clip. See Figure 3-3. Adding Oil Hydraulic Refer to the Engine Operator’s Manual packed with your log splitter Valve for information on adding and checking oil. Control Adding Fuel Refer to the Engine Operator’s Manual packed with your log splitter for information on adding fuel.

  • Page 9: Controls & Features

    Controls & Features Handle Hydraulic Valve Control Cylinder Locking Pin Wedge Beam Hydraulic Oil Fill Hydraulic Valve Control Locking Pin The hydraulic valve control has three positions; forward, neutral The locking pin is located on the cylinder base and is used to lock and reverse and controls the movement of the ram.

  • Page 10: Operation

    Operation Use the handle to slide the cylinder rearward into the WARNING! Read, understand and follow all the operating lock position, engage the safety switch and instructions and warnings on the machine and in reinsert locking pin. See Figure 5-2. this manual before operating.
  • Page 11 Using the Log Splitter Operating Tips NOTE: Always operate on level ground, otherwise fluid may be Always: forced out through the air vent hole. Use clean fluid and check fluid level regularly. Block the front and back of both wheels. Use an approved hydraulic fluid.

  • Page 12: Maintenance & Adjustments

    Maintenance & Adjustments Maintenance Schedule Every Season or 100 After First 5 Hours Before Each Use Every Season Hours Check Hydraulic Fluid Lubricate Beam & Splitting wedge Check Hardware & Hose Clamps Replace Hydraulic Fluid Off-Season Storage WARNING! Before cleaning, lubricating, repairing or inspecting, disengage the control lever and stop When the log splitter will not be used for an extended period of engine.

  • Page 13: Service

    Service Belt Replacement While your partner continues to hold the unit up, grasp the idler pulley nut with a 9⁄16 hex wrench or socket and pivot WARNING! Be sure to shut the engine off, disconnect the idler bracket as shown in Figure 7-2. This will enable the the spark plug wire and ground it against the engine to belt to be easily removed from the idler pulley.

  • Page 14: Troubleshooting

    Troubleshooting Problem Cause Remedy Cylinder rod will not move 1. Broken or worn belt. 1. Replace belt. 2. Shipping plugs left in hydraulic hoses. 2. Disconnect hydraulic hoses, remove shipping plugs, reconnect hoses. 3. Set screws in pump pulley not adjusted 3.

  • Page 15: Replacement Parts

    Replacement Parts Component Part Number and Description 754-04128 Belt 727-04182 Valve/Cylinder Hose 727-04154 Log splitter Hose 727-04156 Return Hose 727-04157 Inlet Hose 726-04079 Hose Clamp 734-1781 Wheel, 8 x 1.75 720-04088 Grip, .625 Phone (800) 800-7310 to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are also available free of charge at www.mtdproducts.com.

  • Page 16: Warranty

    For domestic use, this warranty will apply for a period of 2 years from date of purchase. Warranty for commercial or industrial use is 90 days from the date of purchase. In the event of dispute, MTD Products Australia Pty Ltd will determine whether the machine was used for domestic, or commercial or industrial use.

Table of Contents