Microphone Connections - ADS -1030 Installation And Operating Instructions Manual

MICROPHONE CONNECTIONS

Microphone 1
Microphone 1 uses a standard 1/4" mono Jack plug.
The input is unbalanced and has priority over all other inputs
Tip...........Signal
Sleeve......Screen
Microphone 2
Microphone 2 uses a standard 1/4" mono Jack plug.
The input is unbalanced and designed for low impedance microphones.
Auxiliary 1 & 2
AUX 1 and 2 use standard phono sockets. each imput has two sockets which when con-
nected to stereo equipment mix the left and right channels to obtain a Mono signal.
Pin........Signal
Sleeve.....Screen
Booster Output
Tip
Sleeve
Pin
Sleeve
NOT APPLICABLE
Constant Voltage Output
100V
For use with loudspeakers designed for 100V line systems.
Connections are to the common and 100V treminal
Com
+ +
Low Impedance
For use with loudspeakers designed for low impedance.
Connections are to Common and 4 or 16ohm terminals
4 ohm 16 ohm
Com
+ +
100V
+
+
+
+