HP 40gs User Manual page 397

To transmit
an aplet
Extending aplets
1. Connect the PC or aplet disk drive to the calculator by
an appropriate cable.
2. Sending calculator: Open the Library, highlight the
aplet to send, and press
–
The
SEND TO
options:
HP39/40 (USB)
HP39/40 (SER)
USB DISK DRIVE
port
SER. DISK DRIVE
RS232 serial port
Note: choose a disk drive option if you are using
the hp40gs connectivity kit to transfer the aplet.
Highlight your selection and press
–
If transmitting to a disk drive, you have the
options of sending to the current (default)
directory or to another directory.
3. Receiving calculator: Open the aplet library and
press .
–
The
RECEIVE FROM
options:
HP39/40 (USB)
HP39/40 (SER)
USB DISK DRIVE
USB port
SER. DISK DRIVE
RS232 serial port
Note: choose a disk drive option if you are using
the hp40gs connectivity kit to transfer the aplet.
Highlight your selection and press
The Transmit annunciator— —is displayed until
transmission is complete.
.
menu appears with the following
= to send via the USB port
= to send via the RS232 serial port
= to send to a disk drive via the USB
= to send to a disk drive via the
menu appears with the following
= to receive via the USB port
= to receive via the RS232 serial port
= to receive from a disk drive via the
= to receive from a disk drive via the
.
.
22-5