Subscribe to Our Youtube Channel
Related Manuals for Energer ENB461GRD
Summary of Contents for Energer ENB461GRD
- Page 1 SAFETY AND OPERATING MANUAL Original Instructions 14 810W 115mm ANGLE GRINDER ENB461GRD...
- Page 2 Read all safety warnings and all instructions before use. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 810W 115mm ANGLE GRINDER ENB461GRD...
-
Page 3: General Safety Instructions
Dress in a suitable manner. Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away from moving parts. Loose clothing, jewellery or long hair can be caught in moving parts. 810W 115mm ANGLE GRINDER ENB461GRD... -
Page 4: Special Safety Instructions
Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron 810W 115mm ANGLE GRINDER ENB461GRD... - Page 5 Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control. Additional safety instructions for grinding and cutting-off operations Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations: 810W 115mm ANGLE GRINDER ENB461GRD...
- Page 6 Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. 810W 115mm ANGLE GRINDER ENB461GRD...
-
Page 7: Noise Information
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). 810W 115mm ANGLE GRINDER ENB461GRD... - Page 8 The tool is double insulated. This means that all the external metal parts are electrically insulated from the mains power supply. This is done by placing insulation barriers between the electrical and mechanical components making it unnecessary for the tool to be earthed. 810W 115mm ANGLE GRINDER ENB461GRD...
- Page 9 Be sure the supply is the same as the voltage given on the rating plate. The tool is fitted witha two-core cable and plug. Remove the mains plug from socket before carrying out, any adjustment or servicing. Intended use The machine is intended for cutting metal and stone materials without using water. 810W 115mm ANGLE GRINDER ENB461GRD...
-
Page 10: Description Of The Symbols
Wear eye protection Wear ear protection Wear respiratory protection Wear safety gloves Double insulation Class Conforms to all relevant safety standards. Warning yyWxx Manufacturing date code: Year of manufacturing (20yy) and week of manufacturing (Wxx); 810W 115mm ANGLE GRINDER ENB461GRD... -
Page 11: Components And Controls
COMPONENTS AND CONTROLS Spindle lock button On / off switch Lower flange Upper flange Grinding disc guard Auxiliary handle Flange wrench Cutting disc guard 810W 115mm ANGLE GRINDER ENB461GRD... -
Page 12: Technical Data
Wear ear protection when sound pressure is over 80 dB(A) ACCESSOIRES The machine comes with the following accessories : 1 pc Auxiliary handle 1 pc Hex wrench 1 pc Flange spanner 1 pc cutting disc guard 1 pc grinding disc guard 810W 115mm ANGLE GRINDER ENB461GRD... - Page 13 Please always double check the disc and select the one which is fit for purposes. WARNING! NEVER USE CUTTING DISC AND GUARD FOR GRINDING OPERATION! NEVER USE GRINDING DISC AND GUARD FOR CUTTING OPERATION! Grinding disc guard Cutting disc guard 810W 115mm ANGLE GRINDER ENB461GRD...
-
Page 14: Disc Guard
CAUTION! The machine should only be used with both hands. Depending on the working method, the Auxiliary handle can be mounted in two different positions on the grinding head.(Fig.3) Do not continue to use an auxiliary handle if it is Fig.3 damaged. 810W 115mm ANGLE GRINDER ENB461GRD... -
Page 15: On/Off Switch
Always carry out a test run before starting work and after every tool change! Always ensure that the tools are in good condition, correctly mounted and able to turn freely. The trial run should be at last 30 sec. Fig.5 810W 115mm ANGLE GRINDER ENB461GRD... -
Page 16: Removing Disc
Loose the flange with the spanner provided and then removes the disc from spindle. CAUTION! Check the diameter of disc regularly during use. If it is less than 80mm, replace it! 810W 115mm ANGLE GRINDER ENB461GRD... -
Page 17: Working Advice
As the wheel wears down in use, the effective peripheral surface speed will reduce if the rotational speed remains constant and may result in a reduced grinding efficiency. To make sure the machine work smoothly, the wheel should be replace with the maximum size less than 80 mm. 810W 115mm ANGLE GRINDER ENB461GRD... -
Page 18: Terms Of Use
Older wheels should be issued before newer wheels and if there is any doubt, or if wheels have been in stock for more than three years, the manufacturer should be consulted about their suitability for use. 810W 115mm ANGLE GRINDER ENB461GRD... -
Page 19: Environmental Protection
GUARANTEE This ENERGER product carries a guarantee of 12months. If yourproductdevelops a faultwithinthisperiod, youshould, in the first instance contact the retailerwhere the item waspurchased. This guaranteespecificallyexcludeslossescaused due to: - Fair wear and tear - Misuse or abuse - Lack of routine maintenance... -
Page 20: Plug Replacement
Note: If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket. 810W 115mm ANGLE GRINDER ENB461GRD... - Page 21 EN 61000-3-2 EN 61000-3-3 EN 60745-1 EN 60745-2-3 Authorised Signatory and technical file holder Date : 07/09/2012 Signature:_________________ Name / title: Peter Harries / Quality Manager Powersmith (UK) LTD. Trade House , Mead Avenue ,BA22 8RT 810W 115mm ANGLE GRINDER ENB461GRD...
Need help?
Do you have a question about the ENB461GRD and is the answer not in the manual?
Questions and answers