New Folder; Date And Time Setup - Minolta DiMAGE A1 Instruction Manual

NEW FOLDER

This allows the creation of new folders. The folder-name option on
in section 2 of the setup menu must be set to standard form in
order to use the new-folder function. When selected, the electronic
keyboard (p. 99) automatically appears so the folder name can be
entered. Once the name is typed in and the enter button on the
keyboard is highlighted and entered, the folder will be created and
the name will be listed in the select-folder option.
Every folder name begins with a three digit index number. When the electronic keyboard activates,
three digits will be displayed in the register. This number cannot be changed. Every time a new folder
is created, the folder number will increase automatically by one greater than the highest folder num-
ber on the memory card. A five-character folder name must be entered after the number; only capital
letters, numbers, and the underbar can be used. To cancel the electronic-keyboard display without
creating a new folder, press the menu button.

DATE AND TIME SETUP

It is important to accurately set the clock. When a still image or a movie clip is recorded, the date and
time of the recording are saved with the image and are displayed during playback or can be read with
the DiMAGE Viewer software included on the CD-ROM. The camera's clock is also used with data
imprinting.
When the Date/Time-set option is selected and
entered, the date/time screen will be displayed. The
left/right keys of the controller are used to select the
item to be changed and the up/down keys are used to
change the value. When the date and time have been
adjusted, set the clock by pressing the central button of
the controller.
138
S
ETUP MENU
Custom set Color mode
File # memory Off
Folder Name Std. form
Select folder 100MLT16
–
New folder
–
Date/Time set
Date/Time set
2003 . 10 . 23
13 : 14
YYYY/MM/DD
:move :sel :enter