The picture cannot be recorded.
•
Is the [REC]/[PLAYBACK] selector switch at the [!] setting?
•
Is the mode dial correctly set?
•
Is there any memory remaining on the built-in memory or the card?
> Delete the pictures which are not necessary to increase the available memory.
The recorded picture is whitish.
•
The picture can become whitish if there is dirt e.g. fingerprints on the lens.
> If the lens is dirty, turn on the camera, eject the lens barrel
surface with a soft dry cloth.
The area around where the pictures were taken becomes dark.
•
Was this picture taken with the flash at the close range when the zoom was near [W] (1k)?
> Zoom in a little, and then take the pictures.
•
Was this a picture taken in [PIN HOLE] in Scene Mode?
The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated.
•
Setting the [MIN. SHTR SPEED] to faster speed might make the picture darker.
> Set the [MIN. SHTR SPEED]
2 or 3 pictures are taken at one time.
> Set Auto Bracket (P65), [HI-SPEED BURST] (P75), [FLASH BURST]
or [BURST]
The subject is not focused properly.
•
The focus range varies depending on the Recording Mode.
> Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
> The shutter speed becomes slower when pictures are taken in dark places so hold the
camera firmly with both hands to take the pictures.
> When taking pictures at a slow shutter speed, use the self-timer.
Taking pictures using Auto Bracket is not possible.
•
Is the number of recordable pictures 2 or less?
Downloaded From camera-usermanual.com Panasonic Manuals
(P102)
(P103)
of the [REC] Mode menu to [OFF].
Others
Recording
(P46)
(P64)
to slower speed.
(P43)
(P38)
- 162 -
(P36)
(P8)
and gently wipe the lens
(P76)
in Scene Mode
(P45)
(P63)
(P52)