Setup - TC-Helicon MP-76 User Manual

Setup

Ready...
The MP-76 box should contain the following
items:
MP-76 microphone
► 1
► 1 Microphone clip
1 Carrying case
►
Inspect all items for signs of transit damage. In
the unlikely event of transit damage, inform the
carrier and supplier.
If damage has occurred, keep all packaging as it
can be used as evidence of excessive handling
force.
MP-76 English Manual – 2015-01-20
Set...
Connect your MP-76 to the next device in the
►
signal chain using an XLR cable.
► You're done!
Cable recommendations
Each MP-76 compatible product has slightly dif-
ferent setup options, but there is one common
thing to consider:
The recommended cable length between
your TC-Helicon device and MP-76 should be
25 feet/7.5 meters or less. Cable runs greater
than 25 feet/7.5 meters, or cables shorter than
25 feet/7.5 meters that connects to a snake may
cause line noise and/or cause Mic Control to
function unreliably.
Setup
4