Voicesolo Fx150 - TC-Helicon MP-76 User Manual

Using MP-76 with your

VoiceSolo FX150

MP-76 English Manual – 2015-01-20
Make sure your VoiceSolo FX150 is running
the newest firmware version. Use VoiceSupport
software to update your device's firmware. You
can download VoiceSupport here:
tc-helicon.com/products/voicesupport/
Ensure the +48V button on your VoiceSolo
►
FX150 is pressed IN.
Press and HOLD the Low EQ button for the
►
channel you've got a Mic Control enabled mic
connected to for five seconds.
Please note that FX150 only supports MP-76
on Channel 2.
Mic Control for MP-76 is predefined:
► Up: Reverb on/off
► Left: Volume down
Right: Volume up
►
Bottom: Mute
►
Using MP-76 with your VoiceSolo FX150
MP-76 LCD and VoiceSolo FX150
On most supported products, the MP-76's LCD
will show the preset number currently selected
on the device.
Since VoiceSolo FX150 has no presets, the dis-
play will shows the level of Channel 2 instead.
When Channel 2 is muted, the MP-76 display will
flash and show the level as "0".
8