Intermittant Control System Wiring Diagram - White Mountain Hearth Vail Installation Instructions And Owner's Manual
Vent-free hydraulic thermostat models vfp24fp2(0,1,2,3)l(n,p)-1 millivolt models: vfp24fp3(0,1,2,3)l(n,p)-1; vfp24fp3(0,1,2,3)l10(n,p)-1 (10,000 btu unit) intermittant pilot models: vfp24fp7(0,1,2,3)l(n,p)-1
Table of Contents
Advertisement
INTERMITTANT CONTROL SYSTEM WIRING DIAGRAM
If any of the original wire as supplied with this unit must be replaced, it must be replaced with equivalent gauge and temperature
rated wire.
This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket, permanently
located, manufactured (mobile) home where not prohibited by local codes. This appliance is not convertible for use with other gases,
unless a certified kit is used.
CAUTION
Do not operate the appliance with panel(s) removed, cracked or broken. Replacement of the panel(s) should be done by a licensed
or qualified service person.
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, personal injury or loss of life. Instal-
lation and service must be performed by a qualified installer, service agency or the gas supplier.
Page 24
30411-0-0612
Advertisement
Table of Contents
Troubleshooting
