Table of Contents
Advertisement
Assembling the Right Refrigerator
Door
Install the right-side door first.
1
Make sure that the plastic sleeve is
inserted in the bottom of the door. Lower
the door onto the middle hinge pin as
shown in the figure.
2
Fit the top hinge
latch and slot it into place. Rotate the lever
counterclockwise to secure the hinge.
3
Install the grounding screw and connect
the wire harness
over the hinge lever
Hinge Lever Latch
.
4
Make sure that the door-switch located
inside the cover is tightly connected.
Position the cover in its place. Insert and
tighten the cover screw
INSTALLATION
15
.
Advertisement
Table of Contents
