Service Test Program - Philips LX3600D Service Manual

SERVICE TEST PROGRAM

To start service test program
hold S & SOURCE
buttons depressed and
press the STANDBY button*
Display shows the
ROM version
"S-Vyy"
DISPLAY
TEST
BII
Button pressed?
Y
Display shows Figure 1
BII
Button pressed?
Y
Display shows Figure 2
9
Button pressed?
Y
* Mains power to set must be on
Hold till the Display is shown - ignore last setting info on the display
S refers to Service Mode
V refers to Version
yy refers to Software version number of the uProcessor
(counting up from 01 to 99)
MAIN MENU
N
N
N
TEST
EEPROM FORMAT
TEST
ROTARY
ENCODER TEST
LEAVE SERVICE
TEST PROGRAM
3-1
Figure 1
Figure 2
Activated with ACTION
S
Load default data. Display shows "NEW" for 1 second.
Caution!
All presets from the customer will be lost!!
SOURCE / VOLUME Display shows value for 2 seconds.
Knob Values increases or decreases in steps of 1 until
0 (Min.) or 40 (Max.) is reached.
Disconnect
mains cord
Various
other Tests
LX3600D Service Test Program dd wk0326