JVC KW-V41BT Instruction Manual page 53

CONNECTION/INSTALLATION
Connecting microphone for Bluetooth
(only for KW-V41BT/KW-V21BT)
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
Removing the unit (Only for
KW-V41BT Region 4/KW-V21BT
Region 4/KW-V11 Region 4)
Removing the trim plate
Engage the catch pins on the extraction
1
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
Remove from the upper two catches.
2
7
• The frame can be removed from the top side in
the same manner.
4
Removing the unit
Remove the trim plate. (See the left
1
column.)
Insert the two extraction keys (4), then
2
pull them as illustrated so that the unit can
be removed.
4
• Be careful to avoid injury from the catch pins on
the extraction key.
ENGLISH
53