Samsung SGH-2200 Owner's Manual page 75

The lock code is factory set to 0000. To change the
phone lock code, refer to menu option 7-2. Once the
correct lock code has been entered, you can use the
phone until you switch it off.
Phonebook Lock
When the Phonebook Lock feature is enabled, you
must enter the 4-digit phone lock code each time you
access the phonebook to dial numbers or store
numbers in it.
Fixed Dialling Number
This feature allows you to restrict your outgoing calls
to a limited set of phone numbers.
N o t e: If your SIM card does not support this feature ,
the menu option is not displayed.
FDN List: shows the fixed dialling number list.
The options available depend on whether the FDN
mode is enabled or disabled.
To call a number in the list, press the
If the FDN mode is disabled, you cannot call the
number and the message Check FDN Mode is
displayed for two seconds.
FDN Mode: enables or disables the FDN mode.
To change the FDN mode, you must enter your PIN2.
Security Settings
Menu 7-4
Menu 7-5
key twice.
75