Programming
# 1
1 2 3 4 5 6 7
or:
Enter
1 2 3 4 5 6 7
This seam section should have
- the knee switch function ( seam section end )
- and a stitch length of 2.4 mm.
2
4
Enter
or:
Enter
This seam section should have
- the pedal function ( seam section end )
- and the thread trimmer ( seam section end )
- and a stitch length of 2.8 mm.
11 - 33
Fig. 11 - 63
Switch on the knee switch function ( number key 3 ).
Activate the knee switch.
Confirm the seam section end by pressing the Enter key.
# 2
NO. OF STITCHES 2
Fig. 11 - 64
Input the second seam section:
Select the stitch length function ( number key 1 ).
Enter the stitch length.
Confirm with the Enter key.
Sew the second seam section manually.
The number of stitches is counted and displayed in the status line. After stopping, the
machine skips automatically to inputting the seam section end.
Switch on the knee switch function ( number key 3 ).
Activate the knee switch.
Confirm the seam section end by pressing the Enter key.
Input the third seam section:
Enter
8
9 0
Enter
8
9 0
Esc
Clear
Esc
Clear