Connecting External Components - Panasonic UB-T780BP Operating Instructions Manual

Connecting External Components

1.
Connect the elite Panaboard to a computer using the USB cable (included).
•
Be sure the elite Panaboard software is installed on the computer before connecting it to the elite
Panaboard.
•
elite Panaboard: Plug the B connector (smaller connector) into the elite Panaboard's USB port.
Computer: Plug the A connector (larger connector) into a USB port on the computer.
•
Do not connect the elite Panaboard via a USB hub. This could result in erroneous operation.
To USB Port
2.
Connect the computer to a projector.
•
For instructions on connecting your computer and projector, refer to the respecting instruction manuals.
About the Usage Location
•
Do not place the elite Panaboard where it is directly exposed to sunlight, near a stove, near to a heating/
cooling vent or exposed to strong winds.
•
Do not use the elite Panaboard in a location less than 10 °C (50 °F) or in a location subject to extreme
changes in temperature.
Note
•
The elite Panaboard may not work properly when used in one of the above locations.
USB Cable
(Included)
Computer
AC
Video Cable
Projector
AC
Operating Instructions (For Basic Operations)
Usage
1
15