Advertisement
22
How to Place a Call Using a Stored Nametag
1. Push the
G
button. When the system responds with "OnStar ready" and the
talk-tone, say "Call <nametag>."
2. OnStar responds with "OK, calling <nametag>." (Making a call utilizes minutes.)
Tips
• If there is a pause before the entire phone number is spoken, the system repeats
the numbers and then plays the talk-tone. Continue saying the numbers from
where the pause occurred.
• Make sure that the radio volume is turned down.
• To store phone numbers, say at least 7 digits. Always say "1" and the area code
so calls connect.
• Use multiword or multisyllable nametags, like "My house."
• If the vehicle is sold, be sure to delete all the stored nametags. Press the
G
button and give the "Delete" or "Delete all nametags" command.
• Avoid using similar-sounding nametags (like Tim and Kim).
• Do not store a nametag that starts with a number.
• Storing numbers does not utilize minutes.
• Store up to 30 phone numbers.
How to Store the Last Number You Dialed
1.
Push the
G
button. When the system responds with "OnStar ready" and
the talk-tone, say "Store last number"
2. When the system responds with "Please say the name tag," choose a
nametag that is easy to remember, like "Mom's cell phone."
3. The system repeats the tag and asks "Yes or no?"
4. Say "Yes" to confirm or "No" to start over.
5. To place a call, push the
G
button and say "Call Mom's cell phone."
How to Answer Incoming Calls
A ringtone will be heard and the phone icon will flash quickly, notifying you to
answer the call. Push the
G
button to answer the call. When you have connected
to your call, the phone icon will be steady and on. If you have a call waiting, the
phone icon will flash slowly, notifying you that another person is waiting.
How to Get the Vehicle's Number
1.
Push the
G
button. When the system responds with "OnStar ready" and
the talk-tone. say "My number"
2. OnStar responds with "Your OnStar Hands-Free Calling number is <number>."
Advertisement
