Advertisement
• Say "No" if the stop or change is temporary.
• Say "Yes" if a turn has been missed. The system will then calculate a new route.
• Say "Cancel route" if the directions are no longer needed.
Turn-by-Turn Navigation Commands
Voice commands can be used to obtain information about an active route.
1. Push the
G
button to activate voice recognition.
2. When the system responds with uonStar readyu and the talk-tone, give
a voice command from the list below.
Voice Commands:
• "Cancel Route" -to cancel the current route.
• "Repeat''- to hear the last maneuver given.
• "Route Preview''- to hear all the maneuvers. Maneuvers will play in sets of three.
• "Update Route" - to recalculate directions.
• "Get My Destination" - to find the distance to the destination and the next
maneuver to be made.
• "Help"- to play all voice commands.
Push the
G
button to stop the play
of the voice commands.
• "English-Metric Setting" - to change
system from English to Metric
measurements. Push the
G
button
to switch to Metric measurements.
• "Store Route Destination" - to store
current destination. The system will ask for
a nametag to store a destination for later
use. Up to 10 destinations can be stored.
• "Plan Route"- to obtain directions for
a stored route. The system will ask for
the assigned nametag for the stored
route destination.
• "Route Destination Directory''- to hear
all of the stored route destination nametags.
• "Delete Route Destination" - to delete
a specific stored route.
• "Delete All Nametags" - to delete every
nametag stored, including Hands-Free
Calling nametags.
• "Go Back" - to go back to the
previous step.
17
Advertisement
