Example Of Connection With A Camera - Contec FlexNetViewer RP-VL-R-02 User Manual

3. Function

Example of connection with a camera

Figure 3.2. Example of connection with a camera
CAUTION
- Configuration of multiple transmitters and one receiver is not possible.
- Unlimited number of receivers can be connected.
- With composite input the image is output from the receiver's DVI output at 480p resolution. No
images are output from transmitter's DVI output.
- This product uses MPEG-4 compression, the input image cannot be completely reproduced. Please
confirm the recycled product quality of animation beforehand with lending machine.
- Do not alter the resolution with the picture signal input.
- When the screen is not normally displayed by the influence of compatibility , please change the
resolution setting of the transmitter and the receiver to the using PC resolution by using the main
unit management utility. Refer to the document file included with the downloaded main
management utility in regards to detailed information on the main management utility.
- It is likely to picture is distorted according to the environment when communicating by wireless
LAN.
- Refer to the separate Technical Reference regarding records of operating data for the monitor, PC
(graphics card) and wireless LAN. The Technical Reference is available for download from
CONTEC's website.
- Because composite input is analog signal, it is some loss of picture quality compare with DVI input.
- Please refer to the document file of the main body management utility for the setting when the
router is used.
20
RP-VL-S-02, RP-VL-R-02