Acoustic Research AW771 Installation And Operation Manual page 11

iii. Connecting to a Stereo or a Computer:
Transmitter
Audio Input Cable (K)
Warning:
This product is designed to work with line level outputs or
headphone outputs only. DO NOT connect it directly to speaker outputs as it
will permanently damage the transmitter.
III. Powering the Headphones
The AW771 headphones can be powered by the supplied 3 rechargeable AAA
Nickel Metal Hydride (Ni-MH) batteries (supplied) or any other NiCd or
alkaline batteries.
i. Inserting the Batteries:
ii. Using Optional Alkaline Batteries:
The AW771 headphones can also be powered by 3 AAA alkaline batteries (not
included). You may experience slightly longer play time with alkaline batteries,
but you will not be able to recharge them, as you can with the supplied NiMH
or NiCd rechargeable batteries.
Stereo
1/4" headphone
adapter (P)
Battery
compartment
cover (B)
Plug the audio input cable coming out
of the transmitter into the headphone
output of your stereo or the audio
output jack on your computer. Use the
included 1 / " headphone adapter (P)
4
to convert the 3.5mm plug on the
audio input cable to a
needed.
1. Remove the battery compartment
cover (B) by pushing up and out at
the same time on the notch at the
base of the cover.
2. Insert batteries following polarity
("+" and "–") as diagrammed
inside the battery compartment.
/ " plug as
1
4
4