Connecting To A Camcorder - Samsung SyncMaster P50HP User Manual

1.
2.
3.

Connecting to a Camcorder

1.
2.
3.
4.
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Downloaded From TV-Manual.com Manuals
Connect an audio cable to the audio output port on the external device and [AV/COM-
PONENT AUDIO IN[R-AUDIO-L]] port on the monitor, and connect the video output port
on the external device to the [AV IN [VIDEO]] port on the monitor.
Play the DVD, VCR or Camcorder with a DVD disc or tape inserted.
Select AV using the SOURCE button on the front of the PDP display or on the remote.
Locate the AV output jacks on the camcorder. They are usually found on the side or back
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the [AV/COMPONENT AUDIO IN [R-AUDIO-L]] on the PDP Display .
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV
IN [VIDEO]] on the PDP Display .
Select AV for the Camcorder connection using the SOURCE button on the front of the
PDP Display or on the remote control.
Then, start the Camcorder with a tape inserted.
Note
Connections
32