Connecting To A Camcorder - Samsung SyncMaster 460DR-2 User Manual

Hide thumbs Also See for SyncMaster 460DR-2:
Table of Contents

Advertisement

2.
Connect a video cable to [AV IN] on the product and the video output port on the
external device.
3.
Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
4.
Press SOURCE on the product or remote control and select "AV".
Note
AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected
to the LCD Display. For detailed information on connecting AV input devices, refer to the contents
under Adjusting Your LCD Display.

Connecting to a Camcorder

1.
Locate the AV output jacks on the camcorder. They are usually found on the side
or back of the camcorder. Connect a video cable between the VIDEO OUTPUT
jack on the camcorder and the [AV IN] on the LCD Display .
2.
Connect a set of audio cables between the AUDIO OUTPUT jacks on the cam-
corder and the [AV /COMPONENT AUDIO IN [R-AUDIO-L]] on the LCD
Display .
3.
Press SOURCE on the product or remote control and select "AV".
4.
Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder.
(If not, check your local electronics store.)
If your camcorder is stereo, you need to connect a set of two cables.
Connections

Advertisement

Table of Contents
loading

Table of Contents