E-Bench KH 2258 Operating Instructions Manual page 27

2 Press the "PROG./EQ" button once. The display indicates
the following:
3 Continue pressing the "SKIP/SEARCH8" or "SKIP/SEARCH7"
button until the number of the first program storage place for
the desired track is indicated on the LCD display.
4 Then press the "PROG./EQ" button once to program the
selected track. "P-O2" is indicated on the display for the sec-
ond program storage place that is to be programmed.
5 Repeat steps 3. and 4. until all tracks for your compilation
of tracks have been programmed in the desired sequence. Up
to 99 tracks can be programmed in this manner.
6 Press the "PLAY/PAUSE" button once to start playback of
the programmed compilation of tracks.
To end playback of the compiled tracks press the "STOP/OFF"
button once. The programmed compilation of tracks continues
to be stored and the display continues to indicate "PROG".
To renew playback of the programmed compilation of tracks
press the "PLAY/PAUSE" button once again.
To switch off the program function press the "STOP/OFF"
Operating Instructions | 