Table of Contents
Advertisement
INSTALLATION
PI300-SD was designed to be quick and easy to set up and to use. Please follow these simple instructions to get your covert DVR up and running in just a matter of minutes.
Powering your PI300
1.
Connect the included AC adapter to conventional AC outlet.
2.
Connect AC adapter to AC Jack (1) on the back side of PI300.
Connect your PI300 to a TV
1.
Connect the included RCA cable to the RCA Jack (3) on the back side of PI300.
2.
Connect the RCA cable to the Yellow RCA Composite Video Input Jack of
your television.
View your PI300 on a TV
1.
Once you have connected your PI300 to your TV, power both units on.
2.
Set your TV's input source to "VIDEO," "AUX" or whichever source is required for
viewing your connected devices.
PI300-SD User's Manual
SVAT ELECTRONICS
now you can see
5
Hide quick links:
Advertisement
Table of Contents
