Playing A Song; Entering Song Play Mode; Exiting Song Play Mode - Kawai ANYTIME X2 Owner's Manual

Song Recorder
(Internal Memory)
2

. Playing a song

This function is used to playback recorder songs stored in internal memory. To playback a song/part immediately
after recording, start this process from step 2.

1. Entering song play mode

Press the PLAY/STOP button.
The Internal Recorder screen will be shown in the LCD display.
Stopped
Seek bar
* If a USB memory device is connected, press the FUNCTION button
(INT) to select the internal song recorder.
2. Selecting the song/part(s) to be played back
Press the  or  buttons to move the selection cursor over the
 buttons:
song memory or part.
Select song memory/part.
Press the  or  buttons to change the selected song memory
(1-10) or part (1, 2, or 1&2) to be played back.
If a part has already been recorded, a * symbol will be shown.
 buttons:
Move selection cursor.
Part has been recorded
3. Starting/stopping song playback
Press the PLAY/STOP button.
The LED indicator for the PLAY/STOP buttons will turn on, and
the selected song/parts will start to play.
* The selected part can be changed during song playback.
* To adjust the playback tempo of the recorded song, press and hold
the METRONOME button, then press the  or  buttons.
Press the PLAY/STOP button again.
The LED indicator for the PLAY/STOP button will turn off and the
song will stop playing.

5. Exiting song play mode

Press the FUNCTION button (EXIT), to exit the Internal
Recorder and return to normal operation.
40