Introduction: Digital Tv - Philips 42PF9731D User Manual

2504.4 en
Downloaded From TV-Manual.com Manuals
13-12-2006 08:29 Pagina 9

Introduction: Digital TV

First time installation
Besides traditional analogue broadcasts, you can also receive
digital broadcasts via a roof or loft mounted digital antenna in
countries where those signals are available and which are
supported by this TV.Verify if the country you are now located
and you have selected during the installations (see further),
supports digital video broadcasting via antenna.
See www.philips.com/support for the list of supported countries
or consult your local dealer or see the sticker at the back of
your TV.
Note: for digital TV channels via a cable connection, you
will need an extra set top box decoder; for digital TV
channel via satellite, a satellite tuner and dish mounted
outdoors are required. Also certain internet providers
offer digital TV channels via broadband internet and a
settop box.
Switch the TV on
< Press the power switch B at the side of the TV.
> An indicator on the front of the TV lights up and the
screen comes on.
<
If the TV is in standby mode, press the
key on the remote control.
Note: the first time (and only the first time) you switch
on your TV, you see a Welcome screen followed by the
installation procedure. See First time installation.
The installation procedure consists of a series of screens that
will guide you through the installation of your TV.
Follow the instructions on screen.
Note: if the TV has already been installed before and/or you
want to change the First time installation settings, proceed
with Use of the TV menu settings, p. 14.
EN
keys or the B
-P+
9