Introduction: Digital Tv; Switch The Tv On - Philips 32PF9631D User Manual

2558.1._austr.qxd 08-08-2006
EN
8
16:05 Pagina 8
Introduction: HD Digital TV
Next to analogue broadcast reception, your TV has a built-in TV
tuner which receives, decodes and displays digital terrestrial
signals.
Digital TV and radio channels are only available and reproduced:
- when Digital Terrestrial Transmission is applicable in your local
area;
- and if DTT signal is supported by your TV for the country
you live in. See www.philips.com/support for the list of
supported countries;
- digital broadcasting Australia : www.dba.org.au

Switch the TV on

< Press the power switch B at the side of the TV.
> An indicator on the front of the TV lights up and the
screen comes on.
<
If the TV is in standby mode, press the
key on the remote control.
Note: the first time (and only the first time) you switch
on your TV, you see a Welcome screen followed by the
installation procedure. See First time installation, p. 9.
First time installation
The installation procedure consists of a series of screens that
will guide you through the installation of your TV.
Follow the instructions on screen.
Note: if the TV has already been installed before and/or you
want to change the First time installation settings, proceed
with Use of the TV menu settings, p. 13.
keys or the B
-P+