USER OPERATING INSTRUCTIONS
OPENING THE LOCK
1). Enter valid six (6) digit code.
2). The lock will indicate a valid code entry with a double signal.
3). Within four (4) seconds, turn handle to the open position.
4). Pull door open.
• Invalid Code Entry - Lock will signal three (3) times.
WRONG TRY PENALTY
• Entry of four (4) consecutive invalid codes starts a 5-minute delay period.
- LED flashed red at ten (10) second intervals.
• At the end of the delay period, two more consecutive invalid codes will restart
an additional 5-minute delay period.
Entry will not respond to a single keystroke during delay period.
© copyright 2004
3715 Electronic Entry Device
FEATURES
Please see Manager Instructions for addi-
tional features that may be activated on
your unit.
USER CODE
• Open Lock
• Change Code
WRONG TRY PENALTY
• Four (4) consecutive invalid codes
LOW BATTERY WARNING
• Repeated audio and visual signal (LED
AUDIO AND VISUAL SIGNAL
• Double signal (LED flashes and unit
• Triple signal indicates invalid or
(P/N) 12-234 rev 4 • 7/07
initiates five minute delay period.
flashing and repeated beeping) during
opening indicates battery low.
beeps) indicates entry is valid
or accepted.
not accepted.
LA GARD - A Member of The Kaba Group
page 1 of 2
Need help?
Do you have a question about the LGBasic II 3715 and is the answer not in the manual?
Questions and answers
I changed the battery and the safe will now not open with the same six digit code.
@Robert Huston I kept attempting to open the safe every day and finally today it opened!