Advertisement
Using your new remote control
Program your remote control
Turn on your Tv and tune it to the output channel you
A
chose during installation (Ch. 3 or 4), or to the proper
hdmI input.
Install the batteries that were included in this
B
kit in the remote. Press and hold the Tv Power
and Prog buttons until the led light on the remote
turns on, then release the buttons.
Press the Tv Power button to enter automatic search
C
mode. Your remote will search for the correct code.
when your Tv turns off, press the Prog button within
1 second to store your Tv's code.
9 | QUesTIons? twc.com/digitaladapter ^ 1-855-286-1736
Your remote is now programmed and the device code
will be permanently saved.
noTe: If you have any questions, please refer to the Programming
guide that came with your remote.
Advertisement
