Advertisement
Quick Links
Advertisement
Summary of Contents for Time Warner Cable Digital Adapter
- Page 1 Your Digital Adapter Easy Setup Guide...
- Page 2 You’re about to step up to a world of even better picture and sound, and this Easy Setup Guide is here to help every step of the way. Just follow the simple installation instructions on the next few pages, activate your Digital Adapter, and you’ll be all set.
- Page 3 Included in this kit dIgITAl AdAPTer CoAX hdmI Power remoTe Two AAA AdhesIve Ir reCeIver CABle CABle Cord ConTrol BATTerIes FAsTeners Contents 9-10 11-12 Installation Using your new Troubleshooting and Activation remote control and FAQs...
- Page 4 Connect to your Tv If you run your cable line through a vCr/dvd, turn to page 5. Connect the Adapter If your TV has an HDMI port. Connect the power cord to your cable outlet Connect the hdmI cable from this kit Connect the power cord from this to the “hdmI”...
- Page 5 Installation diagram eleCTrICAl oUTleT TelevIsIon CABle oUTleT dIgITAl AdAPTer To Tv Ch 3/4 hdmI +5v dC In sTAndArd ConneCTIon hdmI ConneCTIon If the Adapter is in a spot where the remote control signal gets blocked, use the included Ir receiver. Plug the Ir noTe: oPTIonAl receiver into the “Ir In”...
- Page 6 Connect to your Tv + vCr/dvd If you connect your cable line directly to your Tv, turn to page 3. Connect the Adapter If your TV has an HDMI port. Connect the power cord to your cable outlet Connect the hdmI cable from this kit Connect the power cord from this to the “hdmI”...
- Page 7 Installation diagram eleCTrICAl oUTleT TelevIsIon dIgITAl AdAPTer To Tv Ch 3/4 hdmI +5v dC In CABle oUTleT sTAndArd ConneCTIon hdmI ConneCTIon vCr/dvd If the Adapter is in a spot where the remote control signal gets blocked, use the included Ir receiver. Plug the Ir noTe: oPTIonAl receiver into the “Ir In”...
- Page 8 Activation once you’ve installed all your Adapters you’re ready to activate them. see the easy to follow instructions to the right. once activation is complete, you’ll be ready to program your remote control and get back to all your favorite shows. 7 | QUesTIons? twc.com/digitaladapter ^ 1-855-286-1736...
- Page 9 Activating your Adapter Using your Tv remote, tune to the hdmI or output channel you chose during installation (Ch. 3 or 4). You’ll see an activation screen with our contact number. Call this number to activate your Adapter. 1-855-286-1736 Activation is usually complete in 5–10 minutes, but could take up to 20 during peak times.
- Page 10 Using your new remote control Program your remote control Turn on your Tv and tune it to the output channel you Your remote is now programmed and the device code chose during installation (Ch. 3 or 4), or to the proper will be permanently saved.
- Page 11 Tv Power: Turns Tv on and off once InFo: Press to display current the remote has been programmed. channel information. dTA Power: Turns digital Adapter lAsT: Press to return to the last on and off once the remote has been previously viewed channel.
-
Page 12: Troubleshooting
Check that all cables are firmly connected. Tv is set to the hdmI input. make sure you’ve contacted Time warner Cable If you are using a coax cable, make sure the Tv to activate your Adapter, as described on page 8. - Page 13 Do I need to set my TV to a specific channel? What’s the difference between a Digital set-top box and a Digital Adapter? If you connected your Adapter with a coax cable, set your Tv and Adapter to either Channel 3 or A digital set-top box (sometimes known as a 4, whichever channel doesn’t currently receive...
- Page 14 notes 13 | QUesTIons? twc.com/digitaladapter ^ 1-855-286-1736...
- Page 16 If you have any additional questions or concerns, please visit us online or call us. twc.com/digitaladapter ^ 1-855-286-1736 ©2012 Time Warner Cable, Inc. All rights reserved. Time Warner Cable and the Time Warner Cable logo are trademarks of Time Warner Cable Inc. Used under license. CISCO HD 07-2012...