Table of Contents
Advertisement
eWON
Installation Guide
IG 019 / Rev 1.1
This installation guide explains how to install the eWON Flexy
3G GSM Extension Card FLB 3202.
This installation guide explains how to install the eWON Flexy 3G
GSM Extension Card FLB 3202.
eWON Flexy
3G GSM Extension Card
FLB 3202
P
Installation Guide
Subject to change without notice.
Check
http://wiki.ewon.biz
for the last document release.
Advertisement
Table of Contents
Summary of Contents for eWON FLB 3202
-
Page 1: Installation Guide
Installation Guide This installation guide explains how to install the eWON Flexy 3G GSM Extension Card FLB 3202. This installation guide explains how to install the eWON Flexy 3G GSM Extension Card FLB 3202. Subject to change without notice. Check http://wiki.ewon.biz... -
Page 2: Table Of Contents
Page..............15 5.1 Connecting to the Embedded Web Server................15 5.2 Detected Cards Displayed in the System Page.................15 5.3 Modem Information Displayed in the Info Page.................16 Revision history............................. eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 2/17... -
Page 3: Product Summary
3202 of the eWON Flexy family. The eWON Flexy family is a range of modular industrial gateway/router. As the name eWON Flexy suggests, it has been designed to enable numerous different combinations of Extension Cards and Base Units. The present Installation Guide is focusing on an extension card which, as such, needs to be inserted in one of the Base Units in order to work. -
Page 4: Safety, Environmental & Regulatory Information
Scope The present heading addresses Safety, Environmental & Regulatory Information for the 3G GSM Extension Card FLB 3202. This Extension Card is basically belonging to the same compliance frame than the Base Units. In the present case of a telecommunication Extension Card, additional directives, standards and instructions apply. -
Page 5: Fcc Compliance
Certificate Of Compliance (COC) # E350576 ● CB certificate # DK-29479-M1-UL ● These certificates can be downloaded as PDF files on the eWON Support web site: http://wiki.ewon.biz/Support/07_Documentations/Official_documents eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 5/17... -
Page 6: Hardware Description
Chapter 3. Hardware Description 3. Hardware Description Mechanical Layout and Interfaces SMA-F Female antenna connector SIM-Card drawer Backplane connector eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 6/17... -
Page 7: Extension Card Label
1111 = MTID (product related) 2233 = Year Week 0001 = sequential mfg order = product type CE, UL,... certificate number and Marks logos if applicable. eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 7/17... -
Page 8: Part Number Structure For Extension Cards
Note : if all signal level LED's are off, either there is no signal at all (level 0) or there is a reception error (level 99). eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 8/17... -
Page 9: Specifications Of The 3G Gsm Extension Card
-25 to +70 °C Storage temperature -40 to +70 °C Relative humidity 10 to 95% non-condensing Operating altitude Up to maximum 2000m Storage altitude Up to maximum 3000m eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 9/17... -
Page 10: Plugging The Extension Card Into The Base Unit
Plugging the Extension Card into the Base Unit 3.6.1 Base Unit Slot Compatibility The 3G GSM Extension Card (FLB 3202) must be inserted in one of the “B” slots of the Base Unit. Explanation: The Flexy Base Units feature two type of slots. The A slots are the two first slots starting from the left. -
Page 11: Sim-Card Insertion
SIM-card when the Extension Card will be inserted in the Base Unit. Note the position of the cutoff (1) of the SIM-card. eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 11/17... -
Page 12: Extension Card Insertion
NOT complete its BOOT process. Therefore, the unit will not be accessible through its LAN interface. The slot error is returned by the USR LED. (red ON 1sec, OFF 0.5 sec). eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 12/17... -
Page 13: Multiple 3G Gsm Extension Cards
3.6.5 Power Requirements The internal power converter of the eWON Flexy Base units has been dimensioned to cover a broad range of different combinations of Extension Cards. Users should make sure the total power demand of the Extension Cards does not exceed the capabilities of the Base Unit. That is why the notion of “Energy Points”... -
Page 14: Powering On The Base Unit With Its Extension Cards
Note: Would the USR LED of the Base Unit be flashing RED, it might be because the Extension Card was improperly inserted (for example in a wrong slot). eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 14/17... -
Page 15: Check Card Detection On The Embedded Web Page
To access the system status summary, click on Diagnostic (1) > Status (2) > System Info (3) > System (4). The screen capture below gives an example of an FLB 3202 extension card that has been detected in slot 3 (5). -
Page 16: Modem Information Displayed In The Info Page
- is available in the Info page. The path to the Info page is: Diagnostic (1) > Status (2) > System Info (3) > Info (4). eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 16/17... -
Page 17: Revision History
No part of this handbook can be reproduced, transmitted or copied in any way without written consent from the manufacturer and/or the authors of this handbook eWON sa, Member of ACT'L Group. eWON Flexy - 3G GSM Extension Card - FLB 3202 (Installation Guide) Page 17/17...
Need help?
Do you have a question about the FLB 3202 and is the answer not in the manual?
Questions and answers