Gigabyte GA-X99-UD4 User Manual page 75

Step 5:
Enter the array capacity and press <Enter>. Finally press <Enter> on the Create Volume item to begin creating
the RAID array. When prompted to confirm whether to create this volume, press <Y> to confirm or <N> to
cancel (Figure 13).
[ hi ]-Change
When completed, you can see detailed information about the RAID array in the DISK/VOLUME INFORMATION
section, including the RAID level, stripe block size, array name, and array capacity, etc. (Figure 14)
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volumes :
ID Name
0 Volume0
Physical Devices :
ID Device Model
1 Hitachi HDS72105
2 Hitachi HDS72105
[ hi ]-Select
To exit the RAID BIOS utility, press <Esc> or select 6. Exit in MAIN MENU.
Now, you can proceed to install the SATA RAID/AHCI driver and operating system.
Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126
Copyright(C) Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name : Volume0
RAID Level : RAID0(Stripe)
Disks :
Strip Size : 128 MB
Capacity : 931.5 GB
Sync : N/A
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N) :
Press ENTER to create the specified volume.
[TAB]-Next
Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126
Copyright (C) Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
Level
RAID0(Stripe)
Serial #
JP1532FR3BWV7K
JP1532ER046M2K
[ESC]-Exit
Select Disks
Create Volume
[ HELP ]
[ESC]-Previous Menu
Figure 13
4. Recovery Volume Options
5. Acceleration Options
6. Exit
Strip Size
128KB 931.5GB
Size
465.7GB
465.7GB
Figure 14
- 75 -
[ENTER]-Select
Status Bootable
Normal Yes
Type/Status(Vol ID)
Member Disk(0)
Member Disk(0)
[ENTER]-Select Menu
Configuring SATA Hard Drive(s)