Position Adapter And Align Mounting Plate - August Smart Lock Installation Manual

Step 5:
Position adapter and
align mounting plate.
Remove the tape from the key hole, and use your
A
key to turn your deadbolt to the fully unlocked position.
B If your lock was not in the Compatibility Chart, select
the adapter that fits your tail piece. To do this, slide each
adapter onto the tail piece. The correct adapter will
have the small nub pointing up.
Place the correct adapter onto the tail piece with
C
the small nub pointing up, and tighten the two screws.
Do not over-tighten.
Installation Guide
20