Powersaver - Samsung SyncMaster 151MP Owner's Instructions Manual

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain period of time. The available modes are "On", "Standby", "Sleep", and "Deep Sleep".
PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You
use a software utility installed on your computer to set up this feature. See Table 2 below for
details.
Table 2. Power-saving modes
State
Horizontal Sync
Vertical Sync
Power
Indicator
Power
Consumption
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer's mouse or press a key on the
keyboard.
This monitor is EPA E
with a computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when you are not using it or when leaving it
unattended for long periods.
Appendix
Normal
Operation
Standby Mode
Active Inactive
Active Active
Green Amber
151MP :
40W (Max.)
Less than 3W
171MP :
52W (Max.)
TAR ®
S compliant and NUTEK/ENERGY2000 compliant when used
NERGY
English
Power-Saving Function mode
(EPA/ NUTEK/ ENERGY2000)
Sleep Mode
Position A1
Active
Inactive
Amber Blinking
(0.5 sec interval)
Less than 3W
29
Deep Sleep Mode
Position A2
Inactive
Inactive
Amber Blinking
(1 sec interval)
Less than 3W