Table of Contents
Advertisement
Available languages
Available languages
take
control
Memory 1
Press & hold until
you reach the custom
memorized position.
Recline
Press & hold until
you reach the
desired position.
Memory
*
Go to Zero
While pressing the
Press & release
+ button, press and
hold the Memory 1
Memory 2
or Memory 2 button
Press & hold until
until the blue LED
you reach the custom
stops blinking to
memorized position.
memorize your
recline position.
Go to Zero button activates an automated chair motion. Prior to activation, confirm that all areas behind
and beneath the chair are clear. TO IMMEDIATELY STOP THE CHAIR DURING ANY AUTOMATED
MOVEMENT, PRESS ANY BUTTON ON THE CONTROL PANEL EXCEPT THE PRO BUTTON.
humantouch.com
Legs Up
PRO Extend
Press & hold until you
Press on / Press off.
reach the desired position.
Blue LED lights when
PRO mode is on. LED
Incline
also flashes to confirm
Press & hold until
that a new memory
you reach the
position has been set.
desired position.
PRO
Restore
Press & hold until you
reach the desired position.
Legs Down
Press & hold until you
reach the desired position.
8
Your PCX-720 features advanced programming,
recline to a zero-gravity or inversion position with the touch of a button.
You can also use memory buttons to store two of your favorite positions.
GO TO ZeroG
Custom Position Memory
Have favorite positions other than the pre programmed ZeroG position? Use the two memory buttons to store up to two
custom positions. Simply press and hold
or
while in that position to store it in memory. Next time you sit down
in the chair, simply press and hold the
or
button to return to your favorite position.
Human Touch Safety Feature:
Battery Backup
Your PCX-720 has a built-in battery backup system,
to ensure that you can incline and exit the chair if
a power failure occurs. The battery backup system
uses two 9V batteries (not included). Be sure to
note the date you installed the batteries and replace
them on a regular basis, to ensure that the battery
backup system is functional (normal use does
not drain the batteries). IMPORTANT: To use the
built-in battery backup system to incline and exit
the chair during a power failure, press and hold
the restore button
to automatically restore the
chair to the upright position.
IMPORTANT: The batteries can only be used once; after using the battery backup system,
replace the batteries immediately.
making it easy to
PRO
Press and release the
button to
automatically deploy the footrest and
recline the chair to a zero-gravity
position, relieving pressure from your
spine for ultimate comfort.
9
Advertisement
Table of Contents
