Kia Cadenza Owner's Manual page 128

Features of your vehicle
WARNING
Before programming HomeLink
to a garage door opener or gate
operator, make sure that people
and objects are out of the way of
the device to prevent potential
harm or damage. Do not use
®
HomeLink with any garage door
opener that lacks the safety stop
and reverse features required by
U.S. federal safety standards
(this includes any garage door
opener model manufactured
before April 1, 1982). A garage
door that cannot detect an object
- signaling the door to stop and
reverse - does not meet current
U.S. federal safety standards.
Using a garage door opener
without these features increases
the risk of serious injury or
death.
4 44
Retain the original transmitter of the
RF device you are programming for
use in other vehicles as well as for
®
®
future HomeLink programming. It is
also suggested that upon the sale of
the vehicle, the
®
HomeLink buttons be erased for
security purposes.
Programming HomeLink
✽ ✽ NOTICE
• When programming a garage
door opener, it is advised to park
the vehicle outside of the garage.
programmed
• It is recommended that a new bat-
tery be placed in the hand-held
transmitter of the device being pro-
grammed to HomeLink
er training and accurate transaxle
of the radio-frequency signal.
• Some vehicles may require the
ignition switch to be turned to the
second (or "accessories") position
for programming and/or opera-
tion of HomeLink
• In the event that there are still pro-
gramming difficulties or questions
after following the programming
steps
HomeLink
or 1-800-355-3515.
®
®
for quick-
®
.
listed below, contact
®
at: www.homelink.com