Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE UNIT. NO USER SERVICABLE PARTS INSIDE: REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash within a triangle is intended to alert the user to the presence of dangerous voltage inside the product’s enclosure that may cause an accident resulting in injury or death by fire or electrical shock.
• The fuses are inside of the unit and should be changed by qualified personnel only. Caution • Changes or modifications to this equipment not expressly approved by CEC Co. Ltd. for compliance will void the user’s warranty. AC-Line •...
Volume - Volume Control. Use the Volume-Knob to adjust the volume level. If output power is too high and clipping occurs, AMP3300R will turn down volume. Minimum volume is not absolute silence, due to AMP3300R‘s special gain manage- ment. Use “Mute” for silence.
Rear Panel AC Line - Connection for the AC power cord. Input - LINE IN (audio input) jacks, equipped with RCA connectors. Input for any analog unit. No phono connection and no inlet for coaxial digital outputs from CD-drives or other digital units. Balanced CD - CD is using XLR connectors for balanced signal sources.
• Avoid exposure of the remote sensor to direct sunlight or other light sources as such exposure can cause malfunction. • When operating the remote control unit, pay attention to a free way to the AMP3300R, otherwise control may not be possible.
Never connect any speaker terminal to ground. Due to the full balanced design of AMP3300R both speaker terminals are active. Watch out when connecting active subwoofers or similar devices to the speaker terminals. A short circuit to ground might damage the AMP3300R or at least break a fuse.
• External dimensions (w / h / d): approx.: 435 x 115 x 360 mm • Weight: approx.: 9.2 kg Note: • Specifications and design subject to possible modification without notice, due to improvements. EErrors excepted. CEC Co., Ltd. Saitama, Japan...