Viewing And Editing Health Indicators - BodyMedia SenseWear User Manual

The date and time located to the left and right just above the selector indicate the total
duration of the data file. Inside the rectangle itself, the beginning of each day (midnight) within
this duration is marked by the date and a thin vertical light grey line. Solid-colored areas show
periods when the Armband was on-body and when the Armband was collecting data. Thin
horizontal grey lines show periods when the Armband was off-body and not collecting data.
The shorter blue vertical lines indicate that the Timestamp/Status button was pressed (figure
7).
You can highlight different time periods within the entire duration of the collected data with
the time selector. To select only one day from the time selector, click anywhere on the day you
wish to view. The selector will automatically select that day (midnight to midnight). To select
multiple complete days click on the first day you would like to view and shift-click on the final
day you want displayed.
To select start and end times, drag the time selectors below the horizontal box. You can then
move the selected time period by dragging the bar between the widgets. All values for these
selected times will be automatically updated.
Click the Show Sessions and Timestamps checkbox under the Subject ID on the upper left of
your screen for a chronological list of all on-body sessions and Timestamps. The list will appear
in the window below the Subject ID. Clicking on a specific day or time on the list will also
highlight that item in the interactive time selector.
Figure 7
TIP: To select only one day from the interactive time selector (Figure 7), simply position your
mouse on top of the day you wish to view and click. You can then drag the selected area to
move this 24 hour time period.

Viewing and Editing Health Indicators

The Health Indicators tab (figure 8) will display all biometric readings within the date range of
the data file. These manually entered readings are displayed in the graph. You can customize
the graph by using the legend. Clicking the arrow icon next to each reading type will reveal
options to change the unit of measure used for that reading. If there is no biometric data, only
Energy Expenditure will be graphed and displayed in the legend.
8