Toshiba e-studio 350 User Manual page 4

BASIC Window (Cont'd.)
Reduce/Enlarge/Zoom (Cont'd.)
Specifying Both Original Size and Copy Size
1. Place paper in the drawer(s).
2. Place the original(s).
3. Press the desired drawer, and then the ZOOM button.
4. Press the ORIGINAL SIZE button that represents
the size of the original. Select other copy modes
as required.
5. Press the START button.
Using the Reduction/Enlargement Zoom Buttons or One-touch Zoom Buttons
1. Place paper in the drawer(s).
2. Place the original(s).
3. Press the drawer button representing the desired copy paper size, and then press the
ZOOM button.
4. Press the UP (or DOWN) button to set the desired
reproduction ratio.
Each time you press either button, the reproduction
ratio changes by 1%. Holding down the button
changes it continuously.
You can select the reproduction ratio by pressing the
400%, 200%, 100%, 50% or 25% button directly.
(When placing the originals on the Reversing
Automatic Document Feeder (optional), you cannot
select 400% button.)
5. Press the START button.
Page 2