Table of Contents
Advertisement
RETRIGGER
The Retrigger setting describes how the DDTi interprets and outputs successive
triggers from the same input. The Retrigger setting is the minimum amount of time
between successive triggers needed to generate a second sound.
For example, if a trigger is engaged twice within a 50 ms time period and the
Retrigger setting is 100ms, the DDTi will ignore the second sound and only output the
first. On the other hand, if the Retrigger setting is set to 25ms, the DDTi will output
both sounds, since the second sound occurs beyond the Retrigger boundary.
The Retrigger setting should be set depending on your playing style. If you like to
play with fast drum rolls, you may want to decrease the Retrigger time setting in order
to capture all the nuances of your playing style.
How to change Retrigger setting:
1.
Select the trigger you would like to edit by striking the trigger/pad.
2.
Use the function up/down buttons to select Retrigger.
3.
Use the value up/down buttons to dial in the desired Retrigger setting (0-127
ms).
REMEMBER TO SAVE YOUR CHANGES BY GOING BACK TO KIT!
15
Hide quick links:
Advertisement
Table of Contents
