Table of Contents
Advertisement
Universal Remote Control
The universal remote control allows you to operate the most
important functions such as power on/off and volume control
on your television, video recorder, or DVD player. To be able
to control the device, you must adapt the remote control to the
device first.
Take the following steps:
1. Turn on the device you want to operate.
2. Point the remote control at the remote sensor on the de-
vice.
3. Hold down the device button you want to control until
its light flashes on.
4. Find the manufacturer of the device from the codes list.
5. Enter the three-digits code you have found for your de-
vice and press the
times.
6. If you get no response to the remote control from the de-
vice, repeat from the step 2.
If you cannot find a code for your device, do as follows:
1. Turn on the device you want to operate.
£
¢ ¡
button, then the light blinks three
OK
Appendix A
55
Advertisement
Table of Contents
