Kole Audio KMX Manual

Congratulations on your purchase of one of the finest woofers available for your vehicle today.
The KMX is designed for the serious SPL enthusiast. Our engineers developed a new finished aluminum dust
cap to aid in thermal transfer and also help to lower the resonant frequency. The aluminum dust cap is direct-
coupled to the voice coil former, and serves to draw 50% of the heat away from the voice coil to the dust cap,
thus acting as a voice coil heatsink. This "heatsink" action serves to maintain the strength of the bond between
the cone and the voice coil by preventing adhesive breakdown due to thermal buildup. This revolutionary dust
cap allows the woofer to handle 56% more power without sacrificing sensitivity. Your competition will never
know what hit them.
Please take a few moments to fill out the warranty card and review this manual before installing this woofer for
proper connections and box sizes.
Two Piece, Die-cast Aluminum Basket
Non-Pressed Paper Cone with Aluminum Dust Cap
Large Roll Treated Foam Surround
Woven "Through-the-Spider" Tinsel Leads
Dual CONEX Spiders
Dual 2-ohm Voice Coils
1-piece rubber gasket
Black/Yellow Wrinkle Coat with Diamond Cut Finish
Heavy Duty Connectors
SPL:
Magnet size:
BASV/Kapton hybrid 18 awg voice coil:
RMS Power (watts): 10" – 700
MAX Power (watts): 10" – 1400
Fs
Vas
Qms
Qes
Qts
Xmax
Kole Audio KMX Woofers

Design Features

10" – 89 dB 12" – 90 dB
10"- 170 oz. 12" –270oz.
10" - 3" 12" - 3"
12" – 800
12" – 1600
Thiele / Small Parameters
KMX-10 KMX-12
35.2 Hz 27.39 Hz
0.48 Cu. Ft. 1.45 Cu. Ft.
5.27 5.13
0.479 0.418
0.439 0.3867
0.473" 0.473"
15" – 92 dB
15" – 270 oz.
15" - 4"
15" - 1000
15" – 2000
KMX-15
29.6 Hz
1.79 Cu. Ft.
4.685
0.484
0.439
0.748"