Wash Cycles And Options; Table Of Programmes And Wash Cycles; Wash Options - Indesit PWE 91272 S Instructions For Use Manual

Wash cycles and options

Table of programmes and wash cycles

Description of the wash cycle
Daily Programs
1 Cottons with Pre-wash: extremely soiled whites.
2 White Cottons: extremely soiled whites.
2 White Cottons (1): heavily soiled whites and resistant colours.
2 White Cottons (1-2): heavily soiled whites and delicate colours.
3 Cottons: heavily soiled whites and resistant colours.
4 Coloured Cottons (3): lightly soiled whites and delicate colours.
5 Synthetics: heavily soiled resistant colours.
5 Synthetics (4): heavily soiled resistant colours.
6 Jeans
7 Shirts
8 Mix-Cool 30': to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand).
Special cycles
9 Wool: for wool, cashmere, etc.
10 Silk/Curtains: for garments in silk and viscose, lingerie.
11 Duvets
12 Outwear
13 Sport Shoes
Partial cycles
Rinse
Spin
Drain
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: select wash cycle 2 with a temperature of 60°C and 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be
used for garments which can be washed at 60°C and 40°C. The actual washing temperature may differ from the indicated value.
2) Long wash cycle for cottons: select wash cycle 2 with a temperature of 40.
3) Short wash cycle for cottons: select wash cycle 4 with a temperature of 40.
4) Synthetic program along: set wash cycle 5 with a temperature of 40°C.
1) Test wash cycle in compliance with regulation EN 60456: select wash cycle 2 with a temperature of 60°C.

Wash options

The "PRIME" technology optimises energy, water and time consumption
according to the quantity of garments actually inserted in the machine.
Moreover, pressing the button allows for selecting the following
options:
- Water: allows for reducing water consumption without having to
renounce impeccable results (recommended for heavily soiled garments).
- Energy: automatically selected by "PRIME", this option reduces energy
consumption (recommended for normally soiled garments).
- Time: allows for reducing wash cycle duration (recommended for lightly
soiled garments).
!
This may only be used in conjunction with wash cycles 1, 2, 3, 4, 5 (all
three levels) and 6, 7, 8 (- Energy and - Time levels).
Extra Rinse
By selecting this option, the efficiency of the rinse is increased and optimal
detergent removal is guaranteed. It is particularly useful for sensitive skin.
!
It cannot be used in conjunction with wash cycles 8, , .
Easy iron
By selecting this function, the wash and spin cycles will be modified in order
to reduce the formation of creases. At the end of the cycle the washing
machine will perform slow rotations of the drum, while the EASY IRON and
START/PAUSE indicator lights will flash (blue and orange respectively). To
end the cycle, press the START/PAUSE button or the EASY IRON button.
Detergents
Max. Max.
temp. speed
(°C) (rpm)
Main
Prewash wash Bleach
90° 1200 -
 
90° 1200 -  
60° 1200 -  
40° 1200 -  
60° 1200 -
 
40° 1200 -
 
60° 800 -
 
40° 800 -
 
40° 800 - -

40° 600 -
 
Cold
800 - -

water
40° 800 - -

30° 0 - -

30° 1000 - -

30° 400 -  -
30° 600 -  -
- 1200 - - 
- 1200 - - -
- 0 - - -
For wash cycles number 10-12, the machine will end the cycle while the
laundry is soaking; the EASY IRON and START/PAUSE indicator lights will
flash. To drain the water so that the laundry may be removed, press the
START/PAUSE button or the EASY IRON button.
!
It cannot be used in conjunction with wash cycles 8, 9, 13,
Stain removal
3
3
pour in the detergent and any fabric softener you wish to use, select the
desired wash cycle and enable the "Stain removal"
extra compartment 4 excludes the pre-wash function.
!
It cannot be used in conjunction with wash cycles 1, 6, 8, 9, 10, 11, 12,
13, ,
Fabric
softener
9 53

 9 53
 9 53
 9 53
9 -

9 53

4 46

4 46

4 -

2 -

3 71

2 -

2 -

3 -

- 2,5 -
 Max. 2 pairs -
 9 -
- 9 -
- 9 -
CH RU TR
This function is particularly useful for
the removal of stubborn stains. Insert
4
4
extra compartment 4 (supplied with
the appliance) into compartment
1. When pouring in the bleach, be
1
1
careful not to exceed the "max"
2
level marked on the central pivot
2
(see figure). To bleach laundry with
no other washing action, pour the
bleach into extra compartment 4,
select the "Rinse" cycle
activate the "Stain removal" option
. To bleach during a wash cycle,
.
GB
2,86 98 195
2,54 85 180
1,564 76 185
1,094 92 180
- - 140
0,83 63 100
1,03 60 110
0,56 60 95
- - 75
- - 70
0,10 36 30
- - 90
- - 65
120
- - 60
- - 60
- - 36
- - 16
- - 2
, .
and
option. The use of
7