Table of Contents
Advertisement
Quick Links
Communications Specialties' Fiberlink® 5100
Fiberlink®
5100 Series
10/100/1000 Base-T Ethernet over one
or two single mode or multimode fibers.
User's Manual
Transmit 10/100/1000 Base-T
Ethernet over one or two single
mode or multimode fibers.
The 5100 Series is full-featured
with auto-sensing 10/100/1000
Mbps Ethernet port with Auto
MDIX and full and half duplex
support. And, of course, the
signal fidelity you have come to
expect from Fiberlink®!
World Headquarters
125 Comac Street
Ronkonkoma, New York 11779 USA
Tel:
(631) 273-0404
Fax: (631) 273-1638
info@commspecial.com
commspecial.com
Advertisement
Table of Contents
Related Manuals for Fiberlink Fiberlink 5100-B7L
Summary of Contents for Fiberlink Fiberlink 5100-B7L
- Page 1 User’s Manual Communications Specialties’ Fiberlink® 5100 Transmit 10/100/1000 Base-T Ethernet over one or two single mode or multimode fibers. The 5100 Series is full-featured with auto-sensing 10/100/1000 Mbps Ethernet port with Auto MDIX and full and half duplex support. And, of course, the signal fidelity you have come to expect from Fiberlink®! Fiberlink®...
-
Page 2: Table Of Contents
Contents Fiberlink® 5100 Series Contents Welcome ..............3 Features . -
Page 3: Welcome
Welcome | Features | Package Contents Fiberlink® 5100 Series Welcome Thank you for purchasing Communications Specialties, Inc. ’ s Fiberlink® 5100 Series. The 5100 Series is used to transmit 10/100/1000 Base-T Ethernet over one or two single mode or multimode fiber optic cores. The Fiberlink 5100 Series automatically adapts to the high- est level of performance supported by the device connected to the Ethernet port. -
Page 4: Technical Specifications
Technical Specifications Fiberlink® 5100 Series Technical Specifications Model Part Number Specification Fibers Unit Type Part Number 1000-Base-X Single Mode or Multimode (1310/1490 nm) 5100-B7L BX10-U Single Mode or Multimode (1490/1310 nm) 5101-B7L BX10-D Single Mode or Multimode (1310 nm) 5102-B7L LX/LH Multimode (850 nm) 5102-B1L... -
Page 5: Operating Loss Budgets
*Distance specifications are approximate, based upon connecting a 5100 Transmitter to a 5100 Receiver, and are not guaranteed. CSI cannot estimate or guarantee operating loss budgets when the 5100 Series is used with other, non-Fiberlink devices. Operating loss budget must not be exceeded. -
Page 6: Installation Instructions
Installation Instructions Fiberlink® 5100 Series Installation Instructions The Fiberlink® 5100 Series of fiber optic transmission systems are ready for immediate use and do not require any special tools or equipment. However, an Optical Power Meter, such as the Fiberlink® 6615, can be useful in determining optical loss budgets during your systems design and maintenance. -
Page 7: Indicator Leds
Indicator LEDs Fiberlink® 5100 Series Indicator LEDs General LEDs Status Definition Indicates that correct power has been applied. TX LEDs Status Definition Link RJ-45 Ethernet is linked Blink RJ-45 Ethernet is active Speed is at 1Gbps Blink Speed is at 100Mbps Speed is at 10Mbps FD/COL Full-Duplex... -
Page 8: Operating Pointers
Operating Pointers | Troubleshooting Fiberlink® 5100 Series Operating Pointers Remember to check attenuation of the fiber optic cable. The system will only operate properly if these specifications fall within the range of the system’s loss budget. Troubleshooting Multimode fiber optic cable contains an optical fiber with a light carrying “core” that is only .0025 inches (62.5 microns) in diameter. -
Page 9: Maintenance And Repairs
Maintenance and Repairs | Certifications Fiberlink® 5100 Series Maintenance and Repairs The Fiberlink® 5100 Series has been manufactured using the latest semiconductor devices and techniques that electronic technology has to offer. They have been designed for long, reliable and trouble-free service and are not normally field repairable. Should difficulty be encountered, Communications Specialties maintains a complete service facility to render accurate, timely and reliable service of all products. -
Page 10: Warranty
CSI at the expense and risk of the Buyer. CSI’s obligation under this warranty will be limited, at its option, to either the repair or replacement of defective units, including free materials and labor. In no event shall CSI be responsible for any incidental or consequential damages or loss of profits or goodwill. -
Page 11: Accessories And Related Products
Accessories and Related Products Fiberlink® 5100 Series Fiberlink® 6610 Visible Light Source The Fiberlink® Visible Light Source provides a visible 650 nm laser output that can be used for identifying fiber breaks and individual fibers within fiber bundles, allowing for convenient, on-site testing of fiber networks during construction and maintenance procedures. - Page 12 (631) 273-0404 Fax: (631) 273-1638 info@commspecial.com commspecial.com ©2014 Communications Specialties, Inc. All Rights Reserved. Fiberlink and the starburst logo are registered trademarks of Communications Specialties, Inc. CSI and the triangle designs are trademarks of Communications Specialties, Inc. P/N 128107 Rev. D...